100mm x 25m Solid Unperforated Land Drain Coil Pipe

This single wall 100mm unperforated land drainage pipe comes in a 25mtr coil and complete with one connector (also referred to as coupler or joiner) to connect multiple coils together.

This solid land drain is corrugated, black in colour and non-kitemarked making this an ideal cost effective option for most projects. This flexible coil is made from 100% recycled HDPE, built for excellent water flow and allowing for easy and fast installation.

Unperforated land drain is designed to distribute collected surface water and commonly used in agricultural, domestic, commercial and industrial areas. Unlike perforated coils, this pipe has no perforation holes meaning no water can drain into the pipe. This product would be used for various applications including soakaways, french drains, water storage tanks or attenuation where water is stored and sent to a watercourse such as a river or stream. To protect the pipe from surface traffic or maintained operations damage such as deep spiking, the minimum cover depth should be at least 450mm and the trench you dig should be wider than the diameter of the pipe.

Made in accordance with BS4962:1989 and manufactured in the UK by Naylor, provides the installer with a reliable product that will perform. This product is not suitable as a dispersal drain for septic tanks and it is not recommended to storage this product outside longer than 12 months, due to UV degradation which can cause damage.

We would recommend non-woven geotextile to line the trench during installation to prevent any blockages and the use of junctions if you are installing a herringbone system.