MDPE Water Compression 90° Equal Tee Junction

This MDPE 90 degree equal tee is designed to join metric MDPE water pipes together, creating a 90dg branch from the main pipeline. This mechanical fitting is always recommended to be installed with pipe liners of the same diameter of pipe you are using. A 90D compression tee will connect together three MDPE water pipes of equal diameter. To join pipes of unequal diameter, take a look at our Reducing Sets.

All of our MDPE compression fittings can be used on either blue (potable) MDPE water pipe or black (non-potable) MDPE water pipe. This fitting is WRAS approved and is able to withstand working pressures of up to 16bar / PN 16, allowing the regulation of flow. This MDPE compression range is fast and simple to use and includes the captive nitrile rubber O-ring seal, achieving a sealed system and providing protection against leaks. We recommend always trying to minimise the amount of joints used on any MDPE water installation wherever possible.

MDPE Water Compression 90° Equal Tee Junction are available in the following sizes:

Manufactured by Plasson, the UK’s leading brand of fittings for water mains pipework. With their fittings in over 80 countries and their policy dictating that quality comes first, provides the installer with a trustworthy product that will perform. With over 50 years of experience, quality is the keyword in all Plasson processes, from design through manufacture, assembly and packaging. If you need to connect your MDPE mains water pipe, we can supply a wide range of Plasson fittings to get you connected.

Tested to the following industry standards: ISO 17885 for Water Applications, AS/NZS 4129, ISO 7/1, BS 21, DIN 2999, UNI 9561, NEN 3258, AS 1722, DIN 8076. Polyacetal split rings and NBR o-rings, suitable for water, are supplied as standard. CPVC split rings and EPDM or FPM o-rings and seals are available on request. For aggressive chemical applications, the end user is advised to test suitability. Maximum temperature of use for fittings and valves is the same as the MDPE pipe, however they are not intended for use in hot water applications. They will however withstand sub-zero temperatures.

If you plan to run any water service underground, we would always recommend that the water pipe is buried in the ground inside a blue water duct system. A duct is designed to protect the pipe from damage and alert others to the presence of duct in the ground. Water caution marker tapes are commonly used as additional indications, alerting presence of the pipes. If this is your first time installing ducting, we would always recommend attaching a second drawcord to your pipe as this will enable you to easily install replacements at any point in the future, if required. Your duct system may also need duct access chambers depending on your project, which come in a various sizes to suit.